Output port of type double representing the serial number.

1 (default) | n

Enter a unique number. This setting must match the setting of the corresponding design under test (DUT) subsystem generated. This is usually only relevant in a multi-module model, as otherwise the default value 1 is applied. The module identifier ordinal sequence will also correspond to the ordinal sequence of the modules' positions on the PCIe bus. In this way such modules of the same device type can be uniquely identified. For this reason, if multiple modules of the same type are installed in the target machine and one module is not in use within a given model, a bus and slot for the modules which should be used must be specified.

-1 (default) | scalar

Defines the base sample time at which this driver block gets its sample hit. This parameter can also be set to -1 for inherited sample time. The units are in seconds.