Knowledge Center search search close
Collection of videos, reference examples, and more to support your real-time simulation and testing workflows

Content


Sensor Fusion and Motion Control for Autonomous Racing Cars

Sensor Fusion and Motion Control for Autonomous Racing Cars

Learn how a research team from the Technical University of Munich uses Speedgoat real-time solutions, MATLAB® and Simulink® to develop and test an autonomous driving software stack, capable of operating a racing vehicle close to its physical limits. As an integral part of the framework, sensor fusion and motion control algorithms are optimized and validated for safe and accurate real-time operation, using Rapid Control Prototyping and Hardware-in-the-Loop simulation.

Rapid Control Prototyping

Hardware-in-the-Loop

Whitepapers

10 Ways to Speed Design for Digitally Controlled Power Converters with Simulink

10 Ways to Speed Design for Digitally Controlled Power Converters with Simulink

This whitepaper highlights ways to accelerate digital control development for power converters with system-level simulation, how to validate control code on the processor without damaging electrical system hardware and developing real-time simulations of your electrical system.

Hardware-in-the-Loop

Rapid Control Prototyping

Whitepapers

Enabling Innovation for Automotive HIL Testing and Control Design

Enabling Innovation for Automotive HIL Testing and Control Design

This recorded webinar presents how you can accelerate innovations in the automotive industry with real-time simulation and testing using Speedgoat solutions.

Recorded Webinars

Hardware-in-the-Loop

Rapid Control Prototyping

Battery Management System Integration into an Electronic Control Module for a Hybrid Electric Aircraft

Battery Management System Integration into an Electronic Control Module for a Hybrid Electric Aircraft

Th­is article focuses on BMS integration into the electronic control module (ECM) of the FVA 30 hybrid electric motor glider using a Speedgoat real-time target machine. The challenge is to design an ECM for reliable data processing, allowing pilots to monitor and control the drivetrain.

Published Papers

Rapid Control Prototyping

Accelerate Development of Electric Vehicles with Real-time Testing

Accelerate Development of Electric Vehicles with Real-time Testing

This webinar presents how real-time testing accelerates innovation of automotive electrification, from electric powertrains and power management systems to high-voltage DC battery chargers. It shows how HIL testing is crucial to de-risk integration testing of electric propulsion and battery management systems.

Hardware-in-the-Loop

Rapid Control Prototyping

Recorded Webinars

Developing and Testing Control Systems with MATLAB and Simulink

Developing and Testing Control Systems with MATLAB and Simulink

The webinar explains you an engaging learning experience by exposing you to a broad set of real-life testing scenarios, including real-time interactions with digital twin simulators and physical systems, such as motion sensors, electric motors, and robot manipulators.

Rapid Control Prototyping

Hardware-in-the-Loop

Recorded Webinars

Accelerate Development of Electric Vehicles with Real-Time Testing

Accelerate Development of Electric Vehicles with Real-Time Testing

Real-time testing accelerates innovation of automotive electrification, from electric powertrains and power management systems to high-voltage DC battery chargers.

Recorded Webinars

Rapid Control Prototyping

Hardware-in-the-Loop

Real-Time Simulation and Testing for Academic Research and Teaching

Real-Time Simulation and Testing for Academic Research and Teaching

Researchers and scientists accelerate the designing process of novel control strategies, verify and validate existing embedded controllers or expand real-world systems with emulated digital twins. This webinar takes you one step further and shows how to close the gap between desktop simulation and controlling actual hardware.

Rapid Control Prototyping

Hardware-in-the-Loop

Recorded Webinars

 Rapid Control Prototyping for Power Electronics Control Design

Rapid Control Prototyping for Power Electronics Control Design

This recorded webinar shows how power electronics control engineers can use rapid control prototyping (RCP) with Simulink Real-Time™ and Speedgoat real-time target machines to validate Simulink® algorithms against electric motor and power converter prototype systems.

Recorded Webinars

Rapid Control Prototyping

Accelerate Development of Power Systems with Real-Time Testing

Accelerate Development of Power Systems with Real-Time Testing

This webinar will present how real-time solutions are being used to accelerate electric power generation, renewable energy integration, and onboard systems development. It highlights how Speedgoat real-time solutions enable electrical and control engineers to develop, test, and validate their innovations with hardware prototypes.

Recorded Webinars

Hardware-in-the-Loop

Rapid Control Prototyping

Advancing Electrification with Real-Time Testing

Advancing Electrification with Real-Time Testing

This recorded webinar presents how you can leverage real-time solutions to accelerate renewable energy integration and electric vehicle developments.

Recorded Webinars

Rapid Control Prototyping

Developing and Testing Next Generation Control Systems

Developing and Testing Next Generation Control Systems

Learn how Speedgoat enables you to prototype and test complex control algorithms using full-vehicle simulation. By building a virtual environment for safe and realistic testing and verification, you can reduce prototype testing costs.

Recorded Webinars

Hardware-in-the-Loop

Rapid Control Prototyping

CPU, FPGA, and I/O Solutions for Real-Time Simulation and Testing with Simulink

CPU, FPGA, and I/O Solutions for Real-Time Simulation and Testing with Simulink

In this webinar, MathWorks together with Speedgoat will showcase how to perform real-time simulation and testing, enabling you to rapidly and continuously test and prove your designs, from desktop simulation to testing your designs in real time on hardware platforms.

Recorded Webinars

Hardware-in-the-Loop

Rapid Control Prototyping

Model-Based Design for Predictive Maintenance, Code Generation and Real-Time Testing

Model-Based Design for Predictive Maintenance, Code Generation and Real-Time Testing

This video shows how to automatically generate C code from classification models. First, you’ll see how to validate your algorithm on the desktop. Then, once it is validated, the video will show how to generate code. Next, the video walks through how to use Simulink® to deploy the classification model onto a B&R PLC, and then test it on a real-time representation of the system using a Speedgoat machine.

Recorded Webinars

Hardware-in-the-Loop

Rapid Control Prototyping

Motion Planning and Experimental Validation for an Autonomous Bicycle

Motion Planning and Experimental Validation for an Autonomous Bicycle

This paper introduces a prototype autonomous two-wheeled vehicle developed for experimental verification of motion planning and control algorithms. Finally, it presents and discusses experiments run on the actual vehicle for a particular maneuver. It emphasizes the differences between the trajectories created by different vehicle models.

Publication on ieeexplore.ieee.org

Published Papers

Rapid Control Prototyping

A Balanced Hybrid Active-Passive Actuation Approach for High-Performance Haptics

A Balanced Hybrid Active-Passive Actuation Approach for High-Performance Haptics

This paper describes the design of a high-performance balanced hybrid haptic device. The actuation, design, and control approaches are described and experimentally validated. The results show significant improvements in the stability and rendering range of the device. 

Publication on ieeexplore.ieee.org

Published Papers

Rapid Control Prototyping

Robotic Glove with Integrated Sensing for Intuitive Grasping Assistance

Robotic Glove with Integrated Sensing for Intuitive Grasping Assistance

This paper presents a fully integrated soft robotic glove with multi-articular textile actuators, custom soft sensors, and an intuitive detection controller. The state-machine-based controller uses signals from integrated sensors to detect relative changes in hand-object interactions.

Publication on ieeexplore.ieee.org

Published Papers

Rapid Control Prototyping

A Lightweight Force-Controllable Wearable Arm Based on Magnetorheological-Hydrostatic Actuators

A Lightweight Force-Controllable Wearable Arm Based on Magnetorheological-Hydrostatic Actuators

This paper studies the feasibility of using magnetorheological (MR) clutches coupled to a low-friction hydrostatic transmission.  This combination provides a highly effective yet lightweight, force-controllable supernumerary robotic arm (SRL). Experimental studies conducted on a one-DOF test bench and validated analytically demonstrate a high force bandwidth (>25 Hz) and an excellent ability to control interaction forces even when interacting with an external impedance.

Publication on ieeexplore.ieee.org

Published Papers

Rapid Control Prototyping

Topological Analog Signal Processing

Topological Analog Signal Processing

Researchers at the Swiss Federal Institute of Technology in Lausanne (EPFL) used a Speedgoat Performance real-time target machine and a high-speed analog IO131 module to validate an acoustic topological equation solver experimentally. The setup allowed them to demonstrate the robustness of analog signal processors (ASP) and is an essential step towards a new generation of ultrafast all-optical ASPs. 

Publication on nature.com

Published Papers

Rapid Control Prototyping

An Intelligent Controller based Power Grid Interconnected System for Reliable Operation

An Intelligent Controller based Power Grid Interconnected System for Reliable Operation

The main objective of the research presented is to control the unidirectional boost converter (UBC) by implementing an intelligent controller (IC). The IC continuously captures power conversion based on power output data from wind and solar energy. Then, it injects gate pulses into a power electronic switch based on the data value. The overall design and simulations are performed using MATLAB/SIMULINK.

Publication on ieeexplore.ieee.org

Rapid Control Prototyping

Published Papers

Robust and Reliable Wireless Communication between Smart NOx Sensor and the Speedgoat Engine Control Module

Robust and Reliable Wireless Communication between Smart NOx Sensor and the Speedgoat Engine Control Module

The smart NOx sensor case study investigates the possibility of replacing existing wired CAN bus connections between the smart NOx sensor and the Speedgoat rapid control prototyping system and possible future wireless communication with ECU. In addition, criteria like the transmission in industrial environments, packet loss, RSSI, bit error rate, reliability, and security of the wireless solution are analyzed.

Publication on osuva.uwasa.fi

Published Papers

Rapid Control Prototyping

Robust Switching Control Method to Achieve Tokamak-Shaped Plasma

Robust Switching Control Method to Achieve Tokamak-Shaped Plasma

A robust switching control method with state vector matching and a novel approach for the feedback system simulation are presented in this paper. First, the plant model reconstructs plasma equilibria from experimental data and calculates plasma shape changes. Then, the control system is discretized and run on a high-speed computer for experiments on a real-time testbed.

Publication on sciencedirect.com

Published Papers

Rapid Control Prototyping

Rapid Control Prototyping Tool for the Sirius High-Dynamic DCM Control System

Rapid Control Prototyping Tool for the Sirius High-Dynamic DCM Control System

The monochromator is known to be one of the most critical optical elements of a synchrotron beamline. A Simulink implementation running on a Speedgoat Performance real-time target machine identifies and ensures controlling the dynamic behavior of all subcomponents in the prototype. In addition, this approach enables rapid prototyping by allowing a shared environment for system modeling and testing.

Publication on inspirehep.net

Published Papers

Rapid Control Prototyping

Mechatronic Architecture Development of UX-1

Mechatronic Architecture Development of UX-1

This paper presents a novel design of an underwater robot for exploring abandoned mines. Rapid prototyping of controllers during the development phase of the robot is described, and the mechatronic development of the main controller unit, propulsion system, and ballast is investigated. The robot's mechatronic architecture and the low-level control algorithms demonstrate its potential for performing real-time operations.

Publication on ieeexplore.ieee.org

Published Papers

Rapid Control Prototyping

Drag Reduction in Turbulent Boundary Layer via Real-Time Control

Drag Reduction in Turbulent Boundary Layer via Real-Time Control

This paper demonstrates an approach to real-time control of large-scale structures. Real-time controls reduce the streamwise turbulence intensity as well as skin-friction drag.

Publication on sciencedirect.com

Published Papers

Rapid Control Prototyping

Follow Speedgoat LinkedIn