Skip to main content

IO183: Simultaneous Sampling 16-bit Analog I/O Module

Fast 16-bit analog input and output module with Simulink driver blocks

This I/O module is an analog module with a 16-bit input resolution with 4 single-ended  analog outputs, 8 single-ended (or 4 differential) analog inputs (sharing one A/D converter) and 16 digital I/O. The IO183 I/O module can also be connected by trigger lines to additional I/O modules to synchronously sample and convert analog input or output channels across the different modules. This I/O module is ideal for closed-loop controls and HIL using MATLAB and Simulink.

Analog Inputs

  • 8 single-ended or 4 differential channels, multiplexer, all channels share one A/D converter
  • 16-bit resolution
  • Software selectable ±10V, ±5V, 0-10V, 0-5V input range (one setting for all channels)
  • 100KHz maximum aggregate sample rate

Analog Outputs

  • 4 single-ended
  • 16-bit resolution
  • Single channel and simultaneous update modes
  • Software selectable 0-5V, 0-2.5V output range (one setting for all channels)

Digital I/O

  • 16 lines
  • Software selectable pull up/down resistors
  • Individual direction control
 
Physical  
Form factor PCI Express Mini Card (mPCIe)
Power requirements 0.462W @ 3.3V DC
Bus PCI Express x1
Connectors

Digital I/O: 17-pin M12 male
Cable connector: Phoenix Contact M12 17-pos female connector
Board connector: Phoenix Contact part no. 1442078

Analog I/O: 17-pin M12 female
Cable connector: Phoenix Contact M12 17-pos male connector
Board connector: Phoenix Contact part no. 1442081

Environmental  
Operating temperature -40°C to +85°C
Relative humidity 5 to 95%, non-condensing
Analog inputs  
Number of inputs 8 x 16-bit single ended or
4 x 16-bit differential
Input signal type Voltage
A/D resolution 16 bits
Voltage ranges Software selectable ±5V, ±10V, 0-5V, 0-10V (one setting for all channels)
Input over voltage protection up to ±25V
Analog outputs  
Number of outputs 4 single-ended
Output signal type Voltage
D/A resolution 16-bit
Voltage range Software selectable : 0-2.5V, 0-5V (individually selectable)
Output current Up to 5mA per channel (1Kohm minimum load)
Output error +/-1.5mV (+/-0.03%) max zero scale error (no offset adjustment)
Digital I/O  
Configuration 16 channels (software-configurable direction)
Output voltage +3.3V
Item ID Product Name Components
20183 IO183
  • IO183 16-bit analog I/O module with 8 single-ended or 4 differential sequential sampling 16-bit +/- 10V analog inputs, 4 single-ended 16-bit +/- 10V analog outputs, and 16 x general purpose digital TTL I/O lines
  • 2x shielded round 17-pin M12 cables (male to female). 0.91m (3ft) long
  • 34-way terminal board
  • Driver block library for Simulink Real-Time
  • Installation into real-time target machine


Pricing information
We don't publish pricing information on our website. Upon request by e-mail or phone we can provide a complete price list covering our entire product portfolio in various currencies. We recommend that you get in touch with us to discuss your specific needs. We can then quickly provide you with a tailored quotation including technical and pricing information.

 

Included in delivery

  • I/O module installed into real-time target machine
  • Cable
  • Terminal board
  • Simulink driver blocks
  • Test models
  • Comprehensive documentation

Accessories

Supported target machines

Resources