Products search search close

IO344

Simulink®-Programmable FPGA I/O Module

The IO344 is a Simulink®-programmable FPGA I/O module with a high performance System on Chip (SOC) and very fast analog input and output channels, offering a wide range of capabilities for radio frequency and signal processing applications such as software-defined radio (SDR), MIMO Radar and digital signal processing (DSP).

The IO344 I/O module features an additional GPS interface to connect to an external GPS antenna for sample clock synchronization.

You can expand the capabilities of the IO344 using Speedgoat’s I/O interface extensions for additional digital I/O lines.

Furthermore, AMD® Aurora protocol over fiber optics supports low-latency inter-module communication between multiple IO344s and other optically coupled, Aurora-capable I/O modules, in turn making it possible to extend I/O functionality and algorithmic resources.

Key Features

  • High-performance RFSoC with 930k FPGA logic cells for data processing
  • High-frequency signal acquisition up to 4 GSPS
  • High-frequency signal generation up to 6.4 GSPS
  • Aurora high-speed communication protocols over fiber optic; Lane rate up to 25 Gbit/s
  • Synchronization over GPS
  • Simulink®-programmable FPGA workflow to use HDL Coder™ and Simulink® Real-Time™ supported by the Speedgoat HDL Coder™ Integration Package
 
Physical  
Form factor PCIe x8 interface
Environmental  
Operating temperature 0°C to +50°C
Relative humidity 5 to 95%, non-condensing
Connectors  
2x MPO 25 Gbps 4 Aurora lanes per connector with a speed of up to 25 Gbit/s. Each lane rate speed can be configured individually
20x MMCX analog Analog input, Analog output, Trigger signal, Clock signals and Pulse per second signal
SMA GPS antenna GPS receiver for high-precision absolute time reference
Ethernet RJ-45 Only used for firmware updates
USB 3.0 Not active
Mini USB serial Debugging connector
System on Chip  
Device AMD® Zynq® UltraScale+ XCZU27DR
FPGA logic cells 930k
Multi-Gigagbit Transceiver  
Fiber optic communication 8 MGT on 2x MPO optical connectors
Analog inputs
 
Number of inputs 8x single-ended
Resolution 12 bits
Sample rate Configurable, maximum 4.096 GSPS
Decimation 1x, 2x, 4x, 8x
Input type Transformer coupled
Transformer type Mini-Circuits TCM1-83X+
Full scale input +10 dBm into 50 ohms
Input 3 dB passband 10 MHz to 4,000 MHz
Analog outputs
 
Number of outputs 8x single-ended
Resolution 14 bits
Sample rate Configurable, maximum 4.096 GSPS; Configurable, maximum 6.4 GSPS (when analog input is not used)
Decimation 1x, 2x, 4x, 8x
Input type Transformer coupled
Transformer type Mini-Circuits TCM1-83X+
Full scale input 0 dBm into 50 ohms
Input 3 dB passband 10 MHz to 4,000 MHz
FPGA Coupled RAM  
Type 2,400 MHz DDR4
Size 8 GB
I/O Interfaces
IO344 - Plug-ins
I/O Interface Extension
IO344-21 20x 3.3 V/5 V TTL I/O Lines
IO344-22 6x 3.3 V/5 V TTL I/O lines and 7x RS422/RS485 I/O lines
Item ID Product Name Components
2A3446 IO344
  • 1x IO344 I/O module with Zynq UltraScale+ RFSoC, gen. 2 with 930k logic cells
  • Cable Kit: 20x MMCX to SMA cables (3 ft/91 cm)
  • Driver block library for Simulink® Real-Time™
  • Simulink® test models
  • Comprehensive documentation and Simulink® example models
  • Installation into the real-time target machine
Optional Accessories
350081 MPO-to-MPO cable
  • Fiber optic MPO (female) to MPO (female) cable, (9.8 ft/3 m)
350082 MPO-to-4x SFP+ cable
  • Fiber optic MPO (female) to 4x LC UPC Duplex cable (6.6 ft / 2 m)
I/O Interface Extension (Optional)
2T3446 IO3XX-21
  • 1x IO3XX-21 with a limited number of channels
  • 1x 68-pin male MDR to 68-pin male MDR cable, (6 ft/1.82 m)
  • 1x 68-Pin Female MDR Terminal Board
  • Installation onto the IO344 I/O module
2S3446 IO3XX-22
  • 1x IO3XX-22 with a limited number of channels
  • 1x 68-pin male MDR to 68-pin male MDR cable, (6 ft/1.82 m)
  • 1x 68-Pin Female MDR Terminal Board
  • Installation onto the IO344 I/O module
HDL Coder Integration Package
3A44IP IO344 HCIP
  • IO344 HDL Coder™ Integration Package
  • HDL Coder™ integration for base module and available interfaces


Pricing information
We don't publish pricing information on our website. Upon request by e-mail or phone we can provide a complete price list covering our entire product portfolio in various currencies. We recommend that you get in touch with us to discuss your specific needs. We can then quickly provide you with a tailored quotation including technical and pricing information.

 
IO344 Simulink Programmable FPGA I/O module

Included in delivery

  • I/O module installed in the real-time target machine
  • Simulink® driver blocks
  • MMCX to SMA Cable kit
  • Test models
  • Comprehensive  documentation🔒

Common Applications

  • Digital signal processing (DSP)
  • Software-defined radio (SDR)
  • MIMO radar
  • Phased array
  • Adaptive beamforming
  • High-speed signal acquisition and processing

Supported target machines

Resources

Follow Speedgoat LinkedIn