Speedgoat IO3xx ADC Range
Speedgoat IO3xx ADC Range — The Speedgoat IO3xx ADC Range driver block is used to read the
ADC input range of the individual ADC channels
Your model may contain one block for each I/O module in your target machine.
This driver block has no input ports.
Output port [1:n] of type uint16 representing the ADC input range in
mV. There is one vector element available per ADC channel.
FPGA Module Identifier - Unique identifier for FPGA I/O
1 (default) | n
Enter a unique number. This setting must match the setting of the
corresponding design under test (DUT) subsystem generated. This is
usually only relevant in a multi-module model, as otherwise the default
value 1 is applied. The module identifier ordinal sequence will also
correspond to the ordinal sequence of the modules' positions on the PCIe
bus. In this way such modules of the same device type can be uniquely
identified. For this reason, if multiple modules of the same type are
installed in the target machine and one module is not in use within a given model, a bus and slot for the
modules which should be used must be
-1 (default) | scalar
Defines the base sample time at which this driver block gets its
sample hit. This parameter can also be set to -1 for inherited sample
time. The units are in seconds.
Target Screen Output
This block does not produce any output on the target machine display.