IO105 - Analog input
IO105 - Analog input — Reads the IO105 analog
Simulink Real-Time - Speedgoat
Your model can only contain one of these blocks for each I/O module in your target
This driver block has either n scalar output ports or 1 output port with a width
of n depending on the setting of the Port type dialog field (where n is the number
of selected analog input channels).
If Port type is set to "n ports of type double" the driver block shows n ports
with a signal width of 1. Each port (signal) returns the converted A/D value in
As the IO105 module has a high channel count which can lead to a large number of
output ports (see above), you can set Port type to "1 port with n element vector of
type double" as an alternative. In this case the driver block just shows one output
port of type double but with a signal width of n.
X (X is the analog channel number)
The value from analog channel X in volts.
This ID defines the link to the corresponding Setup block.
Select either "n ports of type double" or "1 port with n element
vector of type double". The data type is double in both cases. For more
information please see the previous 'Inputs and Output' section.
Defines the base sample time at which this driver block gets its sample hit. This
parameter can also be set to -1 for inherited
sample time. The units are in seconds.