News & Media search search close
Read about the latest news on real-time simulation and testing being used around the world in cutting-edge applications
Media

 

Media contact

Natacha Seitz
Head of Strategic Messaging and PR
+41 31 552 13 51
[email protected] 

Partner Solution Integration | Test Motor Drives at Power Levels up to Hundreds of kW

Partner Solution Integration | Test Motor Drives at Power Levels up to Hundreds of kW

Test your inverters and motor drives at power levels up to hundreds of kilowatts by connecting the power amplifiers from the AVL testbed to Speedgoat test systems. This test setup allows you to safely and quickly test by emulating electric motors and batteries.

Real-Time Performance Testing of PID and MPC Controllers for Autonomous Vehicle Steering

Real-Time Performance Testing of PID and MPC Controllers for Autonomous Vehicle Steering

Researchers at the Vellore Institute of Technology and Bringhamton University are using real-time HIL testing to compare traditional PD and PID controllers with a modern Model Predictive Control (MPC) controller for autonomous steering.

Hardware-in-the-Loop Testing of Controls for Autonomous Vehicle Steering

Hardware-in-the-Loop Testing of Controls for Autonomous Vehicle Steering

See how researchers at Vellore Institute of Technology and Binghamton University develop steering systems for autonomous vehicles. They use Speedgoat systems for hardware-in-the-loop testing of controllers.

Success Story | Improving Electric Vehicle Sustainability

Success Story | Improving Electric Vehicle Sustainability

Motors without rare earth magnets are more affordable and sustainable, but they have one caveat: they are harder to control. INSA-Strasbourg and ICube Laboratory use Speddgoat test systems to test their innovative control designs as prototype controllers. 

Solution | Unified Development Platform for Your Motor Controllers and Drives

Solution | Unified Development Platform for Your Motor Controllers and Drives

Develop your motor controllers and drives using modular and scalable Speedgoat test systems, fully integrated with the model-based design workflow from Simulink®. This allows you to test your motor controllers end-to-end, from requirements to validation, within a single environment.

Validation of e-Bike Brake Controllers Using Hardware-in-the-Loop Testing

Validation of e-Bike Brake Controllers Using Hardware-in-the-Loop Testing

Validate the anti-lock braking system (ABS) controller of an electric bicycle (e-bike) using a hardware-in-the-loop testbench. Test the overall system — e-bike and ABS — over a complete parameter space that includes the mass of the rider, load distribution, and tire characteristics.

Test Charging Controllers of Electric Vehicles and Charging Stations

Test Charging Controllers of Electric Vehicles and Charging Stations

Test the charging controllers of your electric vehicle (EV) or the charging station with the EV/EVSE CCS Charging Interface. Accurately emulate the communication and control signals between the EV and the charging station according to the IEC 61851, SAE J1772, DIN 70121, and ISO 15118-2  communication standards.

Test Power Electronics Devices at Power Levels up to 90 kW

Test Power Electronics Devices at Power Levels up to 90 kW

Test your motor drives and inverters at rated power levels of up to 90 kW by connecting the APS 4-Quadrant power amplifiers from Spitzenberger & Spies to Speedgoat test systems. Test safely by emulating electric motors, power grids, or industrial robots with this test setup.

Reference Example | Controller Hardware-in-the-Loop Testing for Induction Motor

Reference Example | Controller Hardware-in-the-Loop Testing for Induction Motor

Test your induction motor controller starting with this turnkey reference example. Model and simulate the behavior of the induction motor, along with its switching dynamics, and adapt seamlessly to your testing use case.

Follow Speedgoat LinkedIn