Speedgoat IO334 D/A Setup
Speedgoat IO334 D/A Setup — The Speedgoat IO334 D/A setup settings.
This Speedgoat block performs the setup
and configuration to use the Speedgoat I/O modules. To use this block, open the HDL
Coder HDL Workflow Advisor and use it to generate a Simulink Real-Time interface
subsystem. This block is located inside the generated Simulink Real-Time interface
subsystem. The mask of this block controls the block parameters. Do not edit the
parameters directly. The FPGA I/O module block descriptions are for information
purposes only. The relevant parameters are promoted to the top level of the
generated Simulink Real-Time interface mask.
This driver block has no input or output ports.
Device Index - Unique identifier for FPGA I/O module
0 (default) | 0-7
Enter a number between 0 and 7. The maximum number of I/O modules
allowed is 8. This setting must match the setting of the corresponding
design under test (DUT) subsystem generated. This is usually only
relevant in a multi-module setup as otherwise the default value 0 is
D/A Voltage Span - D/A output range
Auto (same as ADC) (default) | ± 10V | ±5V | ±
is promoted to the top level of the generated Simulink Real-Time
Target Screen Output
This block does not produce any output on the target machine display.