IO114B - Setup
IO114B - Setup — Configure the IO114 input/output
Simulink Real-Time - Speedgoat
Your model can contain only one Setup block
for each I/O module in your target machine.
The Setup block dialog box allows all the supported I/O types of this module to be
configured, and therefore impacts on the other driver blocks (Analog output, Digital
output, Digital input).
This driver block has no input or output ports.
A unique module ID must be used for each type of I/O module Setup block in your
The module ID has two functions:
It defines the logical connection to link the I/O module driver blocks
with each other
It also has an impact on the PCI slot auto-search feature: if only one
I/O module is installed, the module ID must be set to 1. If multiple modules are installed, it must
be in the range 1:n. Not all the I/O modules installed in the target
machine need be used
The current range. Options are:
PCI Slot (-1: autosearch)
There are two approaches for mapping the blocks to a specific I/O module installed
in the target machine. All modules of the same kind must be configured using the
Auto-Search: the default value -1
allows the real-time target machine to auto-search for the I/O module.
The priority is defined by the module ID (first vector element for a
multinode). The module with the lowest PCI bus/slot number is assigned
to module ID 1 (or [1 x]) and the next module found is assigned to
module ID 2 (or [2 x]), and so on
Explicit Addressing: the location of the module inside the target
machine can be explicitly defined by using the [BusNumber, SlotNumber]
format. To determine the bus number and the PCI slot number, run the
following command in the MATLAB command window: