News & Media search search close
Read about the latest news on real-time simulation and testing being used around the world in cutting-edge applications
Test Charging Controllers of Electric Vehicles and Charging Stations

Test Charging Controllers of Electric Vehicles and Charging Stations

Test the charging controllers of your electric vehicle (EV) or the charging station with the EV/EVSE CCS Charging Interface. Accurately emulate the communication and control signals between the EV and the charging station according to the IEC 61851, SAE J1772, DIN 70121, and ISO 15118-3  communication standards.

Test Power Electronics Devices at Power Levels up to 90 kW

Test Power Electronics Devices at Power Levels up to 90 kW

Test your motor drives and inverters at rated power levels of up to 90 kW by connecting the APS 4-Quadrant power amplifiers from Spitzenberger & Spies to Speedgoat test systems. Test safely by emulating electric motors, power grids, or industrial robots with this test setup.

Reference Example | Controller Hardware-in-the-Loop Testing for Induction Motor

Reference Example | Controller Hardware-in-the-Loop Testing for Induction Motor

Test your induction motor controller starting with this turnkey reference example. Model and simulate the behavior of the induction motor, along with its switching dynamics, and adapt seamlessly to your testing use case.

Reference Example | Controller Hardware-in-the-Loop Testing of Grid-side Converter

Reference Example | Controller Hardware-in-the-Loop Testing of Grid-side Converter

Accelerate integration of renewables into existing grids with this reference example featuring a grid-tied converter. Learn how to model your grid in Simulink® and run it at sample rates in the MHz range on a Speedgoat test system.

Reference Example | Controller Hardware-in-the-Loop Testing of LLC Resonant Converter

Reference Example | Controller Hardware-in-the-Loop Testing of LLC Resonant Converter

Benefit from a hardware-proven reference example to test the power converter controls of your electric vehicle, robots, or power grids. Learn how to create HDL code of an LLC resonant converter model in Simulink®. Run the code on a Speedgoat test system with sample rates in the MHz range.

Hardware-in-the-Loop Testing of Battery Management Systems

Hardware-in-the-Loop Testing of Battery Management Systems

Test and validate your battery management system (BMS) functions, such as cell balancing and state-of-charge (SoC) prediction. The new battery cell emulator lets you emulate voltage levels of up to 1300V with currents per cell of ± 5A at sample rates in the kHz range.

Hardware-in-the-Loop Testing for Permanent Magnet Synchronous Motors (PMSM) Controllers

Hardware-in-the-Loop Testing for Permanent Magnet Synchronous Motors (PMSM) Controllers

This turnkey reference application allows you to start testing your PMSM motor controls instantly. Get going with hardware-proven models of a three-phase drive with a two-level inverter and adapt flawlessly to your testing use case.

IO425 for Motor Controls Testing

IO425 for Motor Controls Testing

This I/O module lets you emulate both resolver signals and signals of variable differential transformers. The IO425 supports multiple frequency and voltage ranges, allowing you to adapt to your motor specifications.

Success Story | IQIP : Virtual Commissioning of Offshore Machines

Success Story | IQIP : Virtual Commissioning of Offshore Machines

IQIP develops machines for installing offshore foundations of large-scale constructions such as wind parks. The engineering team uses an existing Speedgoat hardware-in-the-loop (HIL) test system to commission the control algorithm and train operators virtually.

Follow Speedgoat LinkedIn