Skip to main content

IO75x-32: Multi-node Simulator I/O Module for Ethernet-based Industrial Protocols

32 node simulator I/O module for EtherNet/IP, EtherCAT, PROFINET, or Modbus TCP with Simulink driver blocks

This I/O module allows simulation of up to 32 slave nodes, either leveraging EtherNet/IP, PROFINET, or Modbus TCP. EtherCAT and POWERLINK support are available on demand.

Advantages

This solution has several advantages when compared with a pure virtual simulator:

  • Nodes run in real-time with parallel execution
  • Each node is completely independent
  • Network collisions can happen in the same way as on a real bus
  • Component failure can be simulated by shutting down a node

Applications

This I/O module is suitable for the simulation of large scale industrial setups including:

  • Ships and submarines
  • Process machinery
  • Train networks
  • Wind farms
  • Solar parks
  • Tidal arrays
  • Power grinds

Industrial protocols currently supported are EtherNet/IP, PROFINET and Modbus TCP. EtherCAT support is available on request.


Physical  
Form factor Speedgoat proprietary for Mobile real-time target machine
Power requirements 55W
PCI bus PCIe
Connector 4 x RJ45
Environmental  
Operating temperature -40°C to +85°C
Relative humidity 5 to 95%, non-condensing
I/O Access  
Front 4 x RJ45
Reliability  
Mean time between failures (MTBF) 159000 hours
Compatibility  
Performance No
Mobile Yes
Baseline No
PROFINET  
Nodes 32 slave nodes (2 linear networks with 16 nodes each)
Controller Hilscher netX52 network controller chip with a full network stack and is controlled via dual-port memory.
EtherCAT  
Nodes 32 Slave Nodes
Controller Hilscher netX52 network controller chip with a full network stack and is controlled via dual-port memory.
EtherNet/IP  
Nodes 32 Slave Nodes
Controller Hilscher netX52 network controller chip with a full network stack and is controlled via dual-port memory.
MODBUS TCP
 
Nodes 32 Slave Nodes
Controller Hilscher netX52 network controller chip with a full network stack and is controlled via dual-port memory.
MTBF (Mean Time Between Failure) - MTBF values shown are based on calculation according to MIL-HDBK-217F and MIL-HDBK-217F Notice 2; Environment: GB 20°C. The MTBF calculation is based on component FIT rates provided by the component suppliers. If FIT rates are not available, MIL-HDBK-217F and MIL-HDBK-217F Notice 2 formulas are used for the FIT rate calculation.
Item ID Product Name Components
2Z750X IO750-32 EtherCAT (Slave)
  • 1 x IO750-32 I/O module with two separate networks with 16x EtherCAT slave nodes each.
  • All 32 nodes are connected internally and accessible at the front via two DSUB9 connectors.
  • Driver block library for Simulink Real-Time™
  • Installation into Mobile real-time target machine
2Z752X

IO752-32 Profinet Device (Slave)

  • 1 x IO752-32 I/O module with two separate networks with 16x PROFINET slave nodes each.
  • All nodes are connected internally, and accessible at the front via two RJ45 Ethernet connectors.
  • Driver block library for Simulink Real-Time™
  • Installation into Mobile real-time target machine
2Z754X IO754-32 Modbus TCP Server (Slave)
  • 1 x IO754-32 I/O module with two separate networks with 16x Modbus TCP slave nodes each.
  • All nodes are connected internally, and accessible at the front via two RJ45 Ethernet connectors.
  • Driver block library for Simulink Real-Time™
  • Installation into Mobile real-time target machine
2Z756X IO756-32 EtherNet/IP Adapter (Slave)
  • 1 x IO756-32 I/O module with two separate networks with 16x Ethernet/IP slave nodes each.
  • All nodes are connected internally, and accessible at the front via two RJ45 Ethernet connectors.
  • Driver block library for Simulink Real-Time™
  • Installation into Mobile real-time target machine


Key to X in Item ID
Please replace the X with the code number of the specific target machine into which this I/O module shall be installed:

  • 5 = Mobile real-time target machine

Pricing information
We don't publish pricing information on our website. Upon request by e-mail or phone we can provide a complete price list covering our entire product portfolio in various currencies. We recommend that you get in touch with us to discuss your specific needs. We can then quickly provide you with a tailored quotation including technical and pricing information.

 

Included in delivery

  • I/O module installed into real-time target machine
  • Simulink driver blocks
  • Test models
  • Comprehensive documentation

Supported target machines

Resources