Skip to main content

EtherNet/IP for Simulink

Use Speedgoat real-time solutions to implement EtherNet/IP protocol connectivity with MATLAB & Simulink. Using the Simulink Real-Time workflow and Speedgoat hardware, you can use a wide range of industrial protocols like EtherNet Industrial Protocol (EtherNet/IP) with your real-time application. Speedgoat products provide seamless integration of EtherNet/IP scanner and EtherNet/IP adapter with the MathWorks product family (e.g. MATLAB, Simulink, Simulink Test and Simulink Real-Time).

The ideal solution to interface Simulink with motor servo drives, power controllers, Programmable Logic Controllers (PLC) and other industrial equipment using the EtherNet/IP communication protocol.

Versatile support for EtherNet/IP Scanner (Master) and Adapter (Slave) is provided with dedicated I/O modules (see Selection Guide below). All solutions come with Simulink driver blocks.

About Ethernet/IP

EtherNet/IP (Ethernet Industrial Protocol) is an industrial network protocol widely used in industries such as factory and process. It uses the Ethernet physical layer and is built on the TCP/IP protocols, but has an industrial application layer for robust, real-time networking for high-speed control applications.

Selection Guide

IO755 Gigabit Ethernet I/O module with one port. Supporting EtherNet/IP Scanner (master)
IO756 Gigabit Ethernet I/O module with one port. Supporting EtherNet/IP Adapter (slave)
IO75x-32 Multi-node simulator I/O module: 32 network controller chip with a full network stack

Selection Guide