Skip to main content
Products search search close

IO3XX-22: Rear I/O Signal Conditioning Plug-in

An I/O signal conditioning plug-in for IO3XX FPGA I/O modules to convert the rear LVCMOS lines to RS485 and TTL, with Simulink driver blocks

This signal conditioning plug-in converts 24 of the 64 rear LVCMOS I/O lines of the IO3XX FPGA I/O modules to 3.3V / 5V TTL, and 32 I/O lines to RS422 / RS485. It also adds ESD and overvoltage protection, and supports output currents of up to 24mA.

The I/O is accessible via an MDR 68-pin connector at the front of the enclosure.

Voltage level (3.3 or 5V) and input/output direction is software configurable in seven groups of 8 bits.

Up to three I2C master FPGA code modules can be supported by this module module. I2C Slave support is available on request.

This plug-in can also be used to run parts of your real-time application with automatically generated HDL code using HDL Coder from MathWorks.

Form factor CMC
PCI bus 64-bit, up to 105MHz
Operating temperature 0°C to +70°C. (extended temperature support is not available).
Relative humidity 5 to 95%, non-condensing
Mean time between failures (MTBF)* 890,000 hours
MTBF (Mean Time Between Failure) - MTBF values shown are based on calculation according to MIL-HDBK-217F and MIL-HDBK-217F Notice 2; Environment: GB 20°C. The MTBF calculation is based on component FIT rates provided by the component suppliers. If FIT rates are not available, MIL-HDBK-217F and MIL-HDBK-217F Notice 2 formulas are used for the FIT rate calculation.
Item ID Product Name Components
  • 1 x IO3XX-22
  • 1 x shielded cable, 1.8m/6ft long
  • 1 x 68-pin terminal board with DIN-rail mount
  • Driver block library for Simulink Real-Time
  • Simulink test model
  • Installation into IO3XX FPGA I/O module

Pricing information
We don't publish pricing information on our website. Upon request by e-mail or phone we can provide a complete price list covering our entire product portfolio in various currencies. We recommend that you get in touch with us to discuss your specific needs. We can then quickly provide you with a tailored quotation including technical and pricing information.


Included in delivery

  • I/O module installed into IO3XX FPGA /O module
  • Cable
  • Terminal board
  • Simulink driver blocks
  • Test models
  • Comprehensive documentation

Supported FPGA I/O modules

*) With limited I/O lines support


Follow Speedgoat LinkedIn